Train Conductor

Requirements

Go to the Train Spawn in Sandy Shores ... .
Then navigate to F5 - City Jobs - Job Information - View Trains
- Depending on your Train XP, you can spawn various Trains.
Spawn whatever Train you like. (New drivers start with the first Train)

Use W and S to maneuver the Train
You need to stop at the Train stations marked with a yellow icon ... in the order of 1-5.
To board Passengers, press "Check Station" in the Job Information Menu.
Once boarded, drive to the next Station and press "Check Station" to deboard, and then hit it again again to board.

You can set a keybind to check the stations with a key instead of the menu by binding a key to the Check the Train Stations keybind in the GTA Settings - Keybinds - FiveM

You will need to perform maintenance on your Train so it will continue to function properly.

To check your Trains Status, head to Job Information - Check Maintenance, or look at the message you get when you board/deboard.
To then repair your Train, hit Repair Train. You MUST be at a Train Station in order to repair.

If you don't repair your Train for a long time, one of the following scenarios may happen;
- train derails
- forward or reverse throttle failure
  - if throttle failure happens, you can still drive to a nearby station to repair and save it

If you decide to stop driving your Train, just hit "Toggle Duty" or "Leave Job" to delete your train.

The Train Station Props may go flying, this does not break the job, so you can still board/deboard.
- If you try to stand on one of the stations, you may go flying really far so watch out!

Name	Function
View Trains	Used to Spawn Trains in Sandy Shores
Toggle Duty	Toggle Duty so you can start the Job
Repair Train	Repair your Train at any Station
Check Maintenance	Check the maintenance status of ur Train
Check Station	Board/Deboard at Train Stations
Leave Job	Leaves the Job so you can do another Job